Luxe Outdoor Megahorn III Summer Inner
The summer inner for the Mega Horn III features a greater area of fine mesh to allow for maximum air flow during the summer months.
The high density mesh is suitable for Midge protection.
With a maximum width of 230cm and depth of 145cm this allows for good floor space for two full length sleeping mats.
The internal height is 120cm which offers plenty of space for sitting up and moving around in the sleeping area.
Specifications
Weight: 900g
Floor: 210D Oxford PU coated. HH: 3000mm
Panel: 68D breathable taffeta
Mesh: High density polyester mesh
-
Top tips for a stable shelter in all weathers
If the supporting pole sinks at any stage the material will lose all the tension and the tent can become unstable in high winds, with the possibility of the pole moving. The common tip here is to cut a tennis ball in half and use each half at either end of the pole. It prevents the pole from sinking and also reduces the pressure on the peak. Once this is in place, applying tension on all the surrounding guys will maintain tension throughout the night. Some use Marmite caps or Rebar Mushrooms.
In excessive wet weather we have had occasional reports of the supplied guys slipping in the cleats. A simple overhand knot will stop this. -
Seam sealing the tent
As the silicone tents are designed without seam taping, we recommend user to apply seam sealing on the outside seam of flysheet where necessary (Mainly around the crown area). Along the horizontal stitching around the vent. Down the zip and 'inside' the guy loops and top loop. (Pull apart with your fingers) Anywhere water can gather is a potential point of issue if the tent will be subjected to prolonged rainfall or a persistently wet environment.