Such a simple idea and one which is gaining a lot of attention in the UK for this forthcoming season.
A windshield which when inverted packs around a standard 250 gas cart, clicking into place under the lip of the thread collar.
When you need it, simply unclip it, invert it and hey presto a windshield the correct height for all Primus stoves and many more.
Fits Primus ExpressStove, MicronStove Ti and TiLite. This windscreen significantly increases a stove’s efficiency and shortens boiling time.
 |
|
|
It also fits most commercially available small top-mounted gas stoves. Stove and gas cartridge are sold separately.
Updated information:
I have now had time to play with the shield and test it in certain pots.
It will fit onto a 250 canister and sit inside a MSR pot and enable you to get the lid on. However it is a very tight fit.
The same goes for our Tibetan 1100 pot, again a tight fit.
It will NOT fit inside a Primus Eta Pot or standard Primus Kettle, when on the cart.
Will it fit inside your pot?
When un-clipped the shield measures 103mm at it's widest point by 75mm high.
Will it fit your gas stove?
When clipped onto the lip of the gas canister as shown in the picture, the height from the top of the canister ring to the top of the lip is 69mm.
Inner shield diameter is 111mm.
From gap width is 99mm.
Specifications;
Primus product code: 734670
Weight: 60 g • 2.1 oz
Dimensions: Ø 100 x 76 mm • Ø 3.9” x 3.0
(NB: Cooker and gas canister in picture not supplied)
|
|
;)
